Material Removal Rate Calculator

Material Removal Rate Calculator calculator can be used to calculate the material removal rate for machining processes.

Input Parameters

Calculation Results

Calculation Formula

MRR = Chip Load × Feed Rate × Speed

Where:
MRR = Material Removal Rate (mm³/min)
Chip Load = Amount of material removed per tooth per revolution (mm/tooth)
Feed Rate = Speed at which the tool moves relative to the workpiece (mm/min)
Speed = Spindle speed in revolutions per minute (RPM)

Result

Material Removal Rate (MRR): 0 mm³/min

Material Removal Rate Calculator Calculator Usage Guide

Learn how to use the Material Removal Rate Calculator calculator and its working principles

How to Use the Calculator

  1. Enter the Chip Load in mm/tooth.
  2. Enter the Feed Rate in mm/min.
  3. Enter the Speed in RPM.
  4. Click the Calculate button to calculate the Material Removal Rate (MRR).
  5. Click the Reset button to clear all input fields and results.

Working Principle

The Material Removal Rate (MRR) is a critical parameter in machining processes. It represents the volume of material removed per unit time. The formula used for calculating MRR is:

MRR = Chip Load × Feed Rate × Speed

This formula helps in optimizing machining parameters to achieve the desired material removal rate while ensuring tool life and surface finish.