Code Tool Path Generator for Drilling Holes Calculator

Calculator Functionality

This calculator generates G-code for drilling holes in CNC machines. It takes input parameters such as hole diameter, feed rate, spindle speed, depth of cut, and number of holes to produce a tool path.

Input Parameters

• Hole Diameter (mm): The diameter of the hole to be drilled.
• Feed Rate (mm/min): The speed at which the tool moves while drilling.
• Spindle Speed (rpm): The rotational speed of the drill bit.
• Depth of Cut (mm): The depth to which the drill bit cuts into the material.
• Number of Holes: The total number of holes to be drilled.

Calculation Formula

The calculator uses the following formula to calculate the feed rate:

Feed Rate (mm/min) = Spindle Speed (rpm) * π * Hole Diameter (mm) / 1000

Results

• Calculated Feed Rate (mm/min): The calculated feed rate based on the input parameters.
• Total Tool Path Length (mm): The total length of the tool path generated for drilling all holes.
• G-Code: The generated G-code for the tool path.

Usage Instructions

1. Enter the required input parameters in the provided fields.
2. Click the "Calculate" button to generate the tool path and G-code.
3. Review the results and G-code.
4. Transfer the G-code to your CNC machine and start drilling.